hp-Twin-pumping unit series BIK

5.5

hp-Single-pumping unit series BIK

General details:

Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt. to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.max. suction. head:measured in terms of the manometer Pos. 3 = -0,6 barmax. inlet pressure:= pressure load of the axial face seal: -0,6 till max. +5 bar (see picture page 18)max. nozzle loss:= 70% of discharge at pmax

Twin pumping unit according to scheme I and II without bypass for heating oil EL + L

Connections
suction/pressure
screwed/flanged		 Aggregate-type Discharge
 at 1400 min -1
at 0 – 9
in l/h		 Pump Type
series VB		 Motor-
output
in kW		 Article-no. Dimension
Length x breath x height		 Execution with double filter
according to scheme II
Article-no. Max. pressure
in bar
Pipe D 12/without flange BIK 5000-1 45 VBP 0,18 0520046 600 x 500 x 550 – designed for
max. pressure
of 9 bar
per DIN/EN
12514-1
max.
working pressure
of 6 bar
Pipe D 12/without flange BIK 5000-2 80 VBM 0,18 0520047 600 x 500 x 550 –
Pipe D 12/without flange BIK 5000-3 120 VBG 0,18 0520048 600 x 500 x 550 –
Pipe D 12/without flange BIK 5000-4 160 VBF 0,18 0520049 600 x 500 x 550 –
 
DN 15/DN 15 BIK 5000-5 300 VBGP 0,18 0520050 600 x 500 x 550 0520090
DN 15/DN 15 BIK 5000-6 450 VBGM 0,37 0520056 600 x 500 x 550 0520091
DN 15/DN 15 BIK 5000-7 600 VBGG 0,37 0520057 600 x 500 x 550 0520092
 
DN 25/DN 25 BIK 5000-8 1000 VBHP 0,75 0520058 800 x 700 x 700 0520093
DN 25/DN 25 BIK 5000-9 1500 VBHM 0,75 0520059 800 x 700 x 700 0520094
DN 25/DN 25 BIK 5000-10 2000 VBHG 1,1 0520060 800 x 700 x 700 0520095
 
DN 32/DN 32 BIK 5000-11 3000 VBHGP 1,5 0520061 800 x 700 x 800 0520096
DN 32/DN 32 BIK 5000-12 4500 VBHGM 2,2 0520062 800 x 700 x 800 0520097
DN 40/DN 40 BIK 5000-13 6000 VBHGG 3,0 0520063 800 x 700 x 800 0520098

* To insure proper unit function, all pipe attachments must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site. The size of the pump and/or device attachments is not indicative of the pipe attachment size which must be used.Note for the screwed version: When using a Cu pipe it is imperative that the appropriate EO supporting sleeve be used for EO threaded pipe attachments for DIN 1630 and 2391 steel pipes.